Interfaces & I/O Extenders

Data interfaces are used to turn one incompatible interface into another that is compatible with the rest of the industrial system and ensure data transfer. We offer interfaces such as: USB to RS232, RS485, 4-20mA and others. I/O extenders are devices that increase the number of inputs and outputs in an industrial controller, PLC, Gateway or computer, thanks to which you can connect a greater number of peripherals required by the system. We offer I/O extenders with multiple inputs and outputs.

  • AMB-16I

    High Voltage 16 Input Extender with Modbus

    16 digital input expander with high voltage range from 60V AC up to 500V AC to Modbus RTU. Input also support DC voltage in same voltage range. The power supply range is 8 to 36V and accept DC or AC voltage.
  • AMB-8I

    High Voltage 8 Input Extender with Modbus

    Digital input expander with high voltage range from 60V AC up to 500V AC to Modbus RTU. Input also support DC voltage in same voltage range. The power supply range is 8 to 36V and accept DC or AC voltage.
  • AMB-4I-4O

    4 input 4 output Extender with Modbus

    Input/output extender with Modbus RTU interface. It has 4 isolated digital inputs with range up to 30VDC and 4 relay output with 5A 230V range and NO contacts.
  • ADI-524

    Opto-isolated 4-20mA to Modbus and USB

    The ADI-524 is 4-20mA analog input interface converter to Modbus RTU over RS485 or over USB. It has 4 opto-isolated analogue inputs and RS485/USB output. Extra isolated 24V power supply for 4-20mA sensor/devices and DIP switch for baud-rate and address setting.
  • ADI-501

    USB to RS485 and RS232 isolated interface

    The ADI-501 is an industrial usable USB to RS232 opto-isolated interface. Designed to work in industrial environment. This model has four data signals RX, TX, DTR and RTS.
  • ADI-301

    Isolated USB to USB interface

    The ADI-301 is an industrial grade of USB to USB opto-isolated interface. Designed to work in industrial environment. Perfect to use when there is required galvanic separation between computer and machine.